2000 Toyota Tundra Keyless Remote Programming Instructions

Repeat button procedure to program remaining remote transmitters.

2000 toyota tundra keyless remote programming instructions. Above for 3 seconds. I purchased a new one from the dealer and they told me they would have to drop the dash board to program my keyless remote FCC ID BAB You may want to check with a local automotive locksmith first. INSERT key into Ignition Do NOT turn and PULL the key out.

Key out of the ignition. Release the buttons and immediately press and hold the lock button for two seconds. Despite of the widespread name - Toyota remote programming the method involves training the automobile to recognize a newly purchased remote.

PUSH and HOLD the programming button see pic. Insert the key into ignition switch and turn it to ON. ECU is NOT attached to firewall.

Verify that security light on the information display is solid indicating that the car successfully entered programming. Press and release LOCK or UNLOCk button. Follow these steps to reprogram your Toyota Keyless Remote code.

Insert the key into the ignition Do NOT Turn it and Pull key out. High to Low Most Popular Title Manufacturer Newest Oldest Availability 30 per page 60 per page 120 per page 180 per page 300 per page. Worked great for my 2000 tundra ecu was behind the 6 by 3 black security box to the left on the drivers side dash.

Above will turn on for 5 seconds. Steps 2 and 3 should be performed within 40 seconds. Press the lock and unlock buttons on the new remote simultaneously for 1-12 seconds.