How To Turn Off Tire Pressure Light Toyota Tundra

The TPMS reset button is usually located beneath the steering wheel.

How to turn off tire pressure light toyota tundra. Toyota recommends inflating the tires to 36 psi each. - Tundra Camry Tacoma Prius LTPWS TPMS - YouTube. 2 Remove the cup holder pry it up with a small screwdriver.

How to Reset Toyota Low Tire Pressure Light Yourself. The TPMS is located behind the passenger glove compartment. You dont have to remove the glove compartment.

Remove the bottom it prys right up. If so start the truck and hold it down for 6 seconds then let the truck run for 3 minutes or so. The warning light will turn off when the system is reset.

1 First you have to open the center console. The system should only be reset when all of the tires are filled to the proper pressure. Directly above the floor mat.

How To Reset Tire Pressure Warning Light On Toyota Tundra - YouTube. Plug harness back and button it up. When the tire is filled or if the tires are changed or rotated the tire-pressure sensors must be reset to turn off the warning light and reinitialize the system.

There will be 2 10mm bolts to remove in the bottom. 3 Unscrew the 4 black philips head screws that were hidden. Wait for several minutes with the engine switch in the ON position to allow the system to record each tires pressure then turn the engine off.